ZANE ProEd
Quality & RegulatoryStatus: PUBLISHED // Data_Point_ectd

eCTD Structure Modules 1 to 5: Module-by-Module Map

November 22, 2026 7 min read ZANE ProEd Quality & Regulatory Affairs Desk
Reviewed by: Dr. Mohammed Anas, Pharm.D
eCTD Structure Modules 1 to 5: Module-by-Module Map

The phrase ectd structure modules 1 to 5 describes a fixed top-level map that every regulatory dossier follows, whatever the product or region. Each module has a defined purpose, numbered sections and a place in the folder hierarchy. This guide explains what sits in each module, where Module 1 differs between regions, what changes with eCTD 4.0 and which publishing tools teams use.

What is in each eCTD module?

The ICH M4(R4) guideline organises the Common Technical Document into five modules, with Module 1 covering regional content outside the common CTD [1]. The eCTD is the electronic implementation of that structure, so the numbering in the guideline also governs where files are placed [1]. A new file in an electronic submission starts where a tab would divide documents in a paper submission [1].

Recommended_Programs

Build These Skills Now

Programs from ZANE ProEd Academy that directly address the skill gaps discussed above.

Browse all regulatory affairs courses →
ModulePurposeKey sections (from ICH M4(R4))
Module 1Regional administrative information and prescribing information1.1 Table of contents of the submission; 1.2 documents specific to each region, such as application forms and prescribing information [1]
Module 2Common Technical Document summaries2.1 CTD table of contents; 2.2 introduction; 2.3 Quality Overall Summary; 2.4 Nonclinical Overview; 2.5 Clinical Overview; 2.6 Nonclinical Written and Tabulated Summaries; 2.7 Clinical Summary [1]
Module 3Quality (chemistry, manufacturing and controls)3.1 table of contents; 3.2 body of data; 3.3 literature references. The Module 3 contents follow the M4Q guideline [1]
Module 4Nonclinical study reports4.1 table of contents; 4.2 study reports; 4.3 literature references [1]
Module 5Clinical study reports5.1 table of contents; 5.2 tabular listing of all clinical studies; 5.3 clinical study reports; 5.4 literature references [1]

Module 2 summaries are written against the body of the dossier, so their structure mirrors Modules 3 to 5. Clinical study reports in Module 5 are normally structured according to ICH E3 [5]. Module 4 and Module 5 hold full reports, while Module 2 holds the condensed view of the same evidence.

Worked example: placing a single-document section

Use this sequence when you file a section that contains only one document, such as the nomenclature section of the drug substance.

  1. Find the section number in the M4Q-based Module 3 structure, for example 3.2.S.1.1 Nomenclature [1].
  2. Create one tab labelled with that section number and title. The guideline states that a section with only one document needs only one tab before the document [1].
  3. Save the document as a file. In an electronic submission a document corresponds to a file [1].
  4. Check that the Module 3 table of contents at section 3.1 lists this section at the level it appears in the submission [1].

For long documents, the guideline allows a shortened numbering inside the file, such as 1, 1.1 and 2, provided the document number and title appear in the page headers or footers [1].

How is Module 1 different by region?

Module 1 is the only module that the CTD leaves to each region. The ICH guideline defines its scope as administrative information and prescribing information, with region-specific documents such as application forms placed under section 1.2 [1]. The exact forms, labelling formats and cover letter requirements therefore differ between authorities.

RegionTypical Module 1 content (general)Where to check the current rules
United States (FDA)Cover letter, FDA application forms such as Form FDA 356h, and proposed labellingThe regional FDA eCTD technical specifications and guidance
European UnionApplication forms, product information such as summary of product characteristics, package leaflet and labelling, in the EU formatThe EMA eCTD and EU Module 1 specifications
United Kingdom (MHRA)UK-specific application forms, product information and labellingMHRA guidance for marketing authorisation applications
Canada (Health Canada)Administrative forms and Canadian product labellingHealth Canada submission guidance for the relevant pathway
India (CDSCO)Application forms and labelling required by the CDSCOCDSCO application guidance for the relevant product type

Module 1 content changes faster than Modules 2 to 5 because it follows local law and forms. Treat the table above as orientation only and confirm each item against the current authority specification before compiling.

What changes with eCTD 4.0?

eCTD 4.0 is the next version of the electronic specification for the CTD. It changes how documents, lifecycle and metadata are represented, moving away from the sequence-based backbone used by earlier versions. The CTD section numbering, which defines what goes into Modules 2 to 5, remains the reference for content placement.

Regional adoption of eCTD 4.0 does not happen at the same time in every region. Teams preparing a dossier should confirm which specification version each authority accepts, and whether Module 1 requirements have changed for that version. Software vendors often support both versions during the transition.

Which eCTD publishing tools are used?

No ICH guideline mandates a single publishing tool. Companies usually combine four tool types: eCTD publishing software to build the folder structure and backbone, validation checkers to test the XML and file properties, PDF software to bookmark and hyperlink documents, and regulatory information management systems to track document versions. Common examples include LORENZ docuBridge and Extedo eCTdManager for publishing, Veeva Vault RIM for document lifecycle, and Adobe Acrobat Pro for PDF work.

Validation is the step most often skipped by new publishers. Run the validator before each submission to catch broken hyperlinks, incorrect leaf titles and XML syntax errors, and correct them in the source documents rather than in the output folder.

Key takeaways

  • Modules 1 to 5 are the fixed top-level parts of the CTD: administrative information, summaries, quality, nonclinical reports and clinical reports [1].
  • Module 1 is the only module where content is largely set by each region, so check the local specification for every submission [1].
  • Section numbers in the CTD determine file placement, and a single-document section needs only one tab before the document [1].
  • Module 5 clinical study reports are normally structured according to ICH E3 [5].
  • eCTD 4.0 changes the technical representation of the dossier, while the CTD content map remains the reference for placement.
  • Validate every sequence with a dedicated checker before submission, because tool choice does not replace checking.
Recommended_Programs

Build These Skills Now

Programs from ZANE ProEd Academy that directly address the skill gaps discussed above.

Browse all regulatory affairs courses →

How can I practise eCTD structure hands-on?

Reading the module map is the first step, but building a sequence is what makes the structure stick. The ZANE ProEd eCTD Submission Certification course is a paid programme that covers CTD and eCTD folder structures, Module 1 to Module 5 compilation, and programmatic validation checks in a simulated publishing environment.

Frequently asked questions

Can the section numbers inside a document be shortened?

Yes. The ICH guideline allows shortened numbering within a document, such as 1, 1.1 and 2, as long as the document number and title appear in the page headers or footers [1]. The full numbering string is also acceptable [1].

Are ICSRs part of the eCTD?

No. Individual case safety reports follow the ICH E2B(R3) message specification, which is separate from the eCTD dossier [3]. That specification also requires that attached documents be sent in-line, so a hyperlink to a stored document is not acceptable [3].

Does Module 5 follow a fixed report format?

Clinical study reports are normally structured according to ICH E3, which sets out the expected content and sections of a report [5]. Module 5 then holds those reports under the CTD numbering shown in section 5.3 [1].

Is eCTD 4.0 mandatory everywhere?

No single date applies across all regions. Check the current requirements of each authority before choosing the specification version for a submission.

Sources

  1. ICH M4(R4): Organisation of the Common Technical Document (CTD) (R4). ICH.
  2. ICH E2B(R3): Electronic Transmission of Individual Case Safety Reports (ICSRs): Data Elements and Message Specification (R3). ICH.
  3. ICH E3: Structure and Content of Clinical Study Reports (Step 4 (1995)). ICH.
Recommended_Programs

Build These Skills Now

Programs from ZANE ProEd Academy that directly address the skill gaps discussed above.

Browse all regulatory affairs courses →

Follow Zane ProEd on Google

Preferred Source

Add our publication as a preferred source to get the latest clinical research guides, industry updates, and career intel directly in your Google Top Stories & AI Overviews.

Add on Google